Storage
65
3. Secure both bicycle wheels to the
wheel recesses using the strap
retainers.
4. Check the bicycle to make sure it
is secure.
Caution
Ensure gap between bicycle and
vehicle is at least 5 cm. If
necessary, loosen handlebar and
swivel sideways.
Attaching the adapter
When carrying more than one bicycle,
the adapter must be fixed.
1. Apply the adapter to the rear
carrier system, as shown in the
illustration.
2. Turn the lever (1) forwards and
hold it, then lower the adapter (2)
at the rear.
3. Release lever and check if the
adapter is engaged securely.
4. Guide the strap attached to the
adapter underneath the lever
when folding back the rear carrier
system. Fasten the strap.
Attaching further bicycles
The attachment of further bicycles is
similar to the attachment of the first
bicycle. Additionally, some steps
must be considered:
1. Before putting on the bicycle,
always unfold the wheel recesses
for the next bicycle if necessary.
2. Always rotate the pedals into an
appropriate position before
putting on the bicycle.
Summary of Contents for Mokka X
