166
Driving and operating
Before changing a lane, always
check all mirrors, look over the
shoulder and use the turn light.
Activation
Activate the side blind spot alert in the
Functionality
When the system detects a vehicle in
the side blind zone while driving
forwards, an LED will illuminate in the
relevant exterior mirror.
The LED comes on immediately when
being passed.
The LED comes on after a delay when
passing another vehicle slowly.
Operation conditions
The following conditions must be
fulfilled for proper operation:
● all vehicles are moving in the
same direction and in adjacent
lanes
● the speed of your vehicle is
between 7 and 87 mph
● passing a vehicle with a speed
difference of less than 6 mph
● another vehicle is passing with a
speed difference of less than
15 mph
● the traffic flow is normal
● driving on a straight or slightly
curved road
● the vehicle is not pulling a trailer
No alert will be given in the following
situations:
● in the presence of non-moving
objects, e.g. parked vehicles,
barriers, street lamps, road signs
● in very dense traffic, when
moving vehicles might be
confused with a stationary object
● with vehicles moving in the
opposite direction
● driving on a winding road or a
sharp corner
● when passing or being passed by
a very long vehicle, e.g. lorry,
coach, which is at the same time
detected at the rear in the blind
spot angle and present in the
driver's forward field of vision
● when passing too quickly
Deactivation
The system is deactivated in the Info
Display
The state of the system is stored
when switching off the ignition.
Summary of Contents for Grandland
