Vauxhall COMBO, Owner'S Manual, Page: 334 / 373

332 Vehicle care
● Apply the parking brake and
engage first gear, reverse gear or
P.
● Place a chock under the wheel
diagonally opposite the wheel to
be changed.
● Remove the spare wheel.
● Never change more than one
wheel at once.
● Use the jack only to change
wheels in case of puncture, not
for seasonal winter or summer
tyre change.
● The jack is maintenance-free.
● If the ground on which the vehicle
is standing is soft, a solid board
(approx. 1 cm thick) should be
placed under the jack.
● Take heavy objects out of the
vehicle before jacking up.
● No people or animals may be in
the vehicle when it is jacked-up.
● Never crawl under a jacked-up
vehicle.
● Do not start the vehicle when it is
raised on the jack.
● Before screwing in the wheel
bolts, clean them.
9 Warning
Do not grease wheel bolts.
9 Warning
Ensure to use always the correct
wheel bolts if changing the
wheels. When installing the spare
wheel for temporary usage, the
bolts for alloy wheel rims can also
be used.
● Note that the spare wheel is
secured by the conical contact of
each bolt if the wheel bolts for the
alloy wheel rims are used. In this
case, the washers do not come
into contact with the spare wheel.
1. Disengage wheel bolt caps with
the wheel bolt cover remover.
Steel wheel rims with cover: Pull
off the wheel cover.
2. Attach the wheel wrench and
loosen each wheel bolt by half a
turn.
The wheels might be protected by
locking wheel nuts. To loosen
these specific nuts first attach the