36
Keys, doors and windows
Safety stop
The button on the remote control or
the switch in the centre console must
be actuated until the soft top is in its
respective end position. Releasing
the button or the switch during
operation stops soft top movement
immediately. The soft top remains in
intermediate position only for a
certain time. After this time a warning
chime sounds, the hydraulic pressure
in the system decreases and the soft
top can start to move by itself.
Actuating button or switch once more
continues operation.
Requirements for operation
● Vehicle is stationary or driving
with a speed up to 31 mph.
● Load compartment partition is
folded out, pass-through flap is
closed
3
71.
● Soft top lid is engaged in closed
position.
● Boot lid is completely closed.
● Outside temperature is not lower
than -7 °C for opening and
-10 °C for closing.
● Vehicle battery voltage is
sufficient.
● The system is not overloaded by
repeated operation (max. 5
complete cycles in succession).
If any of these requirements are
not fulfilled, a warning chime
sounds and a message appears
in the Driver Information Centre
when the switch is actuated and
the soft top will not open or close.
● There must be no objects in front
of the rear window or in the pivot
area of the soft top and the soft
top lid.
If the automatic drive is not
operational when the soft top is open,
execute a manual closing process,
see the following instructions in
"Manual closing in the event of a
system fault".
Summary of Contents for Cascada
