Climate control
103
Pressing button
X
during the
procedure will exit without storing
programme adjustments.
To delete a preset departure time,
follow the steps for programming until
heating symbol
Y
flashes. Press
button
q
or
r
until oFF appears in
the display and confirm.
Heating stops automatically
5 minutes after the programmed
departure time.
Note
The remote control system features
a temperature sensor which
calculates the runtime according to
the ambient temperature and the
desired heating level (ECO or
HIGH). The system starts
automatically between 5 and
60 minutes prior to the programmed
departure time.
Set weekday, time and heating
duration
Ö
If the vehicle battery is disconnected
or its voltage is too low, the unit will
need to be reset.
■ Select
Ö
and confirm
■ Select weekday and confirm
■ Change hours and confirm
■ Change minutes and confirm
■ Change the default heating
duration and confirm
Heating level
Y
The preferred heating level for
programmed departure times can be
set to either ECO or HIGH.
Select
Y
and confirm. ECO or HIGH
flashes in the display. Adjust using
the
q
or
r
button and confirm.
Air vents
Adjustable air vents
At least one air vent must be open
while cooling is on in order to prevent
the evaporator from icing up due to
lack of air movement.
Centre air vents
Press the vent to open.
Direct the flow of air by swivelling the
vent.
Push vent to close.
