Vauxhall 2013 Zafira Tourer Owner'S Manual Download Page 148

Page: 148 / 289

Climate control

147

Demisting and defrosting the

windows

■ Press button

: fan automatically

switches to higher speed, the air

distribution is directed towards the

windscreen.

■ Switch cooling

on.

■ Set temperature control to warmest

level.

■ Switch on heated rear window

■ Open side air vents as required and

direct them towards the door

windows.

Note

If the

button is pressed while the

engine is running, an Autostop will

be inhibited until the

button is

pressed again.
If the

button is pressed while the

engine is in an Autostop, the engine

will restart automatically.

Electronic climate control

system

The dual zone climate control allows

different climatisation temperatures

for driver and front passenger side.

Controls for:

■ Temperature on driver side
■ Air distribution
■ Fan speed
■ Temperature on front passenger

side

= cooling

AUTO = automatic mode

= manual air recirculation

= demisting and defrosting

Heated rear window

32, Heated

seats

43, Heated steering wheel

95.

The preselected temperature is

automatically regulated. In the

automatic mode the fan speed and air

distribution automatically regulate the

air flow.
The system can be manually adapted

via the use of air distribution and air

flow controls.

Summary of Contents for 2013 Zafira Tourer


































































































































































































































































































Search results

Summary of Contents for 2013 Zafira Tourer

Reviews:

Brands by name

Popular brands

Vauxhall 2013 Zafira Tourer, Owner'S Manual

Search results

Summary of Contents for 2013 Zafira Tourer

Reviews:

Brands by name

Popular brands