1
Assembling the cabinet
guide slide “left / right“
The guide slides are to be
positioned in such a way that
there are 34 mm between the
cabinet front edge and the
middle hole of the slide; and
from the cabinet upper edge
to the middle hole of the slides,
there should be 74 mm with a
work area stength of 30 mm
(work plate area 40 mm =
64 mm) (see diagram
A
).
Fasteners:
countersunk screws 4.5 x 15
2
Assembling guide slide
“left / right“
Push the guide with the
support bracket across the
mounted cabinet slide.
3
Assembling Ironing Board
on the Support Bracket
The board is placed in the
middle of the support bracket.
Place the angle support on the
front support bracket. Screw
the Ironing board and the
angle support bracket from
underneath on the support
bracket in the front and back.
Fasteners:
Cylinder head screws M 6.0
Washers
Screw nut M 6.0
Note:
Make sure the slide
movement in smooth
before firmly tightening
all screws.
416
34
32
X
2
h
(h)
30er
40er
X
74
64
countersunk screws
4.5 x 15
cabinet guide slide
cabinet guide slide
guide with slide with support bracket
work area
diagram A
cabinet side left / right
screw on frontside
support bracket
ironing board
Cylinder head screws M 6.0
guide side
ironing board
Cylinder head
screws M 6.0
guide side
screw on backside
support bracket
angle support
bracket
