12 Vaultek
®
The mountable base comes with double-sided
tape allowing for quick and easy installation.
Simply peel off the protective layer on the
reverse side of the base, and place where
desired.
Before installing your mountable base, clean
the mounting area to ensure surface is dry for
proper adhesion.
Tip!
MOUNTING
When Smart Key Nano LED flashes red (3)
times that indicates a low battery. Replace the
battery per steps below:
Twist base of Smart Key counter clockwise to
access battery compartment.
1
Remove old battery and install a new
CR2032
battery.
2
Assemble
Smart Key
back together, re-pairing
is not required.
3
BATTERY REPLACEMENT
Summary of Contents for Smart Key NANO
Page 1: ......
Page 13: ...REV 022019 ...
