Vatech PaX-i3D Smart, Installation Manual

Page: 17 / 161

Pax-i3D Smart(PHT-30LFO) Installation Manual
17
1 Introduction
1.3
Marks & Symbols
Symbols Description Location
Alternate current
Attention: consult accompanying documents Label
Dangerous voltage Power board
Protective earth (Ground) Power board
Off (power: disconnect from the main switch)
Main switch
On (power: connect to the main switch) Main switch
TYPE B Equipment Label
Radiation hazard Label
EC REP EC representative Manual
The CE symbol indicates that this product complies with
the European Directive for Medical Devices 93/42/EEC as
amended by 2007/47/EC as a class IIb device.
Label
This equipmentis UL-marked according to UL60601-1 and
CAN/CSA C22.2 No. 601.1
Label
Address where the equipment was manufactured Label
This symbol indicates that electrical and electronic
equipment must not be disposed of as unsorted municipal
waste and must be collected separately.
Label
This symbol warns the user to take precautions when
dealing with electronic components which are sensitive to
static charges
MCU board
packaging
This symbol indicates that this equipment is classified as
a CLASS 1 LASER PRODUCT in accordance with IEC
60825-1 ED.1 regulations. Label