Vatech GREEN SMART, User Manual

Page: 140 / 200

12. Cleaning and Maintenance
132 Green Smart User Manual
12.2 Maintenance
VATECH requires periodic constancy tests to ensure image quality and the safety of the
patient and the operator.
Only VATECH -authorized technicians can perform inspection and service for the
equipment. For technical assistance, contact VATECH service center or your local
VATECH representative.
12.2.1 Regular Maintenance

Always turn off the equipment before performing any maintenance.

Never remove equipment covers. There are no repairable parts
inside.

The only parts that can be replaced by the user are the input fuses,
which must comply with the manufacturer’s specifications.

As a precaution against fire, the replacement should be one in the
same type and range.

There are no user serviceable parts inside this equipment.

If any service is required, please contact the
VATECH
service
center or your local VATECH representative.

Do not unplug cables by force.

Do not expose the equipment or components in an area which is susceptible to water
or humidity.

Do not expose the equipment in an area of extreme fluctuation in temperature, poor
ventilation, direct sunlight, dust, salt, etc.

Keep all detachable components well organized and clean.

Make sure that the equipment is well grounded.

Never try to modify this equipment, including the wires or cables. Doing so may
damage it beyond repair.