Installation, Operating & Maintenance Instructions
Series 244, DN 63 - 80 (I.D.2
1
/
2
" - 3")
Series 245, DN 63 - 80 (I.D.2
1
/
2
" - 3")
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected] www.vatvalve.com
265903EC
2010-03-02
1/10
Vacuum Angle valve
(Series 244)
Vacuum Inline valve
(Series 245)
●
with manual actuator
This manual is valid for the valve ordering number(s):
24436-QA/QH/QE/GE/01
24438-QA/QH/QE/GE/01
24536-QA/QH/QE/GE/01
24538-QA/QH/QE/GE/01
The fabrication number is indicated on each product as per the label
below (or similar):
made in Switzerland
Fabrication No.:
patented
. .
24. . . – . . . . – . . . . / . . . .
A – . . . . . .
Fabrication number
Explanation of symbols:
Read declaration carefully before you start any other
action!
Keep body parts and objects away from the valve
opening!
Attention!
Hot surfaces; do not touch!
Product is in conformity with EC guidelines,
if applicable!
Loaded springs and/or air cushions are potential
hazards!
Disconnect electrical power and compressed air
lines. Do not touch parts under voltage!
Wear gloves!
