VASTEX VDC-513610 Assembly, Operating, And Maintenance  Instructions Download Page 6

 
VASTEX 

 

 

1032 N. IRVING ST. 

INTERNATIONAL  

ALLENTOWN PA. 18109 USA 

Vastex Warranty

 

Doc#01-00-005B    Revised 10/15/07 

(1.)

 Vastex, hereinafter referred to as “seller” warrants only to its original “purchaser”, who holds a copy of 

the original invoice and is the original end user of the equipment in question, its new equipment against 
defects in materials or workmanship on a pro-rated basis. Warranty period begins from date of shipment to 
the buyer and will only apply to customers paid in full. Warranty periods are as follows: one (1) year for E-
1000, and V-1000, three (3) years for all other equipment (including F-Flash), ten (10) years for infrared 
heaters (excluding F-Flash) installed by Vastex in a new dryer, three (3) years for replacement infrared 
heaters, and one (1) year for replacement parts. Rubber blankets, light bulbs and glass on exposure units are 
particularly subject to wear while in use. Wear is not covered by this warranty but as stated above only 
manufacturers defects are covered.  All sales made through Vastex dealers must be certified by that dealer 
before a warranty replacement is issued. 
 

(2.)

 

This warranty is expressly contingent upon the buyer delivering to seller, at the address below, with 

all transportation charges prepaid, the part or parts claimed to be defective within the above 
mentioned warranty periods stated in paragraph one.  The defective part or parts will be repaired or 
replaced at the discretion of Vastex International, Inc. If the equipment in question is less than one (1) 
year old, it will be shipped to the customer at no charge, with an RGA issued by Vastex for the 
defective part.  The defective part must be shipped back to Vastex freight prepaid within 30 days or the 
account will be billed.  If the equipment is more than a year old, the part will be shipped after we 
receive the defective part.  If it’s necessary to expedite the movement of parts and to minimize down 
time to the buyer, the replacement part shall be supplied on a C.O.D. basis. If testing and analysis of 
said part by the seller or its supplier discloses that said part is defective, the cost of said part will be 
refunded to the buyer on a prorated basis.

 

 

(3.)

 Except as otherwise provided herein, the equipment is being sold “as-is”. Final determination of the 

suitability of the equipment for the use contemplated by the buyer, is the sole responsibility of buyer, and 
seller shall have no responsibility in connection with the suitability. 
 

(4.)

 All warranties implied by law, including the implied warranties of merchantability and fitness are hereby 

limited to workmanship and defective parts to a warranty period stated in paragraph one. The express 
warranty and remedies contained herein and such implied limited warranties are made solely to the sole 
warranties and remedies and are in lieu of all other warranties, guarantees, agreements, and other liabilities, 
whether express or implied, and all other remedies for breach of warranty or any other liability of seller, in no 
event shall seller be liable for consequential damages. 
 

No person, agent, distributor, or service representative is authorized to change, modify or extend the 

terms hereof in any manner whatsoever. 
 

These terms and conditions are an essential part of the transaction between the parties and constitute 

the entire agreement between them with respect to the same. 
 

Some states do not allow limitation on how long an implied warranty lasts of the exclusion or 

limitation of incidental, or consequential damages, so the above limitation may not apply to you. 
 

This warranty gives you specific legal rights, and you may also have other rights which vary from 

state to state. 
 

Infrared heaters are the only replacement parts covered for a period of (3) years from date of shipment 

and contingent to receipt of payment in full. 
 

Electrical components can not be returned once installed unless proven defective. 
Please refer to doc. 01-01-006 for warranty implementation help. 
Please refer to doc. 01-00-015 for specific terms and conditions of sale and the limited warranty. 
Please refer to doc. 01-00-017 for V-2000HD printer warranty. 

 

 
F:\Shared\Vastex\01-Manuals & Doc\00-misc\01-00-005B_Warranty.doc

 

5

Summary of Contents for VDC-513610









Reviews: