Alignment Instructions & Tips
2)
Position and attach the
AG
on the pallet using a
center line and references
found on the
AG
.
To align your DiGiT Numbering System, please photocopy the Alignment Guide (
AG
)
which is the back page of this manual. This page will aid you in aligning your screens.
1)
Photocopy (full size) back
page of DiGiT Manual. (
AG)
If your screens do not have, or you do not want
to use, the Alignment Marks, you can do the
same procedure with the box outlines on the
AG
.
3)
Lower the screen and slide the attachment to the
center position of the number farthest to the left.
4)
Line up and center the round Alignment Mark on the
AG
to the oblong Alignment Mark on the screen.
Alignment
Mark
5)
Slide the screen to the center position of the number
farthest to the right.
6) Repeat step 4
7)
After you have the Alignment Marks lined up on each
screen you are printing with, print a test print. For single
color printing, the Alignment Marks will adequately register
your job. For two color printing, additional registration may
be necessary to equalize the amount of Trap on all sides.
“Trap” is the amount of
overlap between the solid
and outline of a number.
Good
Good
Bad
Bad
Good
Bad
For best results; Print both digit’s solid color, flash, and then print the outline.
It is easiest to achieve a uniform outline thickness with this procedure.
Summary of Contents for DiGiT V2NS-8
Page 7: ......
