Assembly
Tools Needed
: (1) Philips Head Screwdriver, (1) Flat Blade Screwdriver, (1) 7/16 wrench
Mount Plate
1)
Remove all parts from the box they were shipped in.
2)
Attach the Mount Plate to a wall in your shop. Use 3
screws with wall anchors. (Hardware Supplied)
3)
Attach Stand Mount brackets to the Mount
plate using the supplied 1/4-20 x 3/4” long bolt
and serrated hex bolt. Tighten with a 7/16”
open end wrench. The Clamping bracket is
installed to each Stand Mount with a 1/4-20 x
1/2” long bolt and serrated hex nut. Leave
these bolts loose for now.
Stand Mount
1/4-20x1/2” Bolt
1/4-20x3/4” Bolt
Clamping
Bracket
Serrated
Hex Nuts
For Stand Mounted Units:
4)
Hang the Spine assembly onto the Mount
Plate. The Spine hooks onto the Mount plate
as shown to the right.
4a
4b
Spine
Assembly
3a
3b
2
For Wall Mount Units:
2