10
2. After the unit entering sleep mode, the temperature indicator will start to flicker, you can wake up the unit
by pressing any button or turning the temperature dial.
3. If there is no any operation after 10 minutes of sleeping mode, the temperature indicator will extinguish,
and the unit will power off, you should restart the unit by pressing the power switch to “O” position then
pressing to “I” position.
CLEANING AND MAINTENANCE
Before cleaning, firstly disconnect the power outlet and let the appliance cools down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the unit base and wipe the
thermal insulation plate with dry cloth.
3. CLEAN: When the appliance needs to be descaled, the clean indicator will be lightened together with
warning can be heard. At that time, turn the temperature dial to “CLEAN” position and then hold and press
the Burst steam button and Steam release button at the same time for 2 seconds to activate the calc clean
procedure. After finish, the“CLEAN” indicator will be extinguished. If do not activate the calc clean
procedure on time, the appliance will turn to the MIN steam amount automatically after operating for only
1 hour.
4. When do not use the appliance for a long time, pour out the water in the reservoir, and the steam iron can
be stored onto the thermal insulation plate.
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the article. Follow these ironing
instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start ironing the articles requiring the
lowest temperature such as those made of synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the lowest ironing temperature to iron
the composition of those fibers.
-Silk and other fabrics that are likely to become shiny should be ironed on the inner side. -Velvet and other
textures that rapidly become shiny should be ironed in one direction with light pressure applied. Always keeps
the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set temperature dial to the
maximum position and use a dry cloth as a mat.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any such object.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So it is suggested that you
should turn the article inside out and iron the reverse side.
