5
Quick Start
I, II & III
Power
OK
Vasindux
PRO+
The Pro controller is designed to start the primary
Energy
,
Relax
and
Sleep
programs quickly. By selecting the
I
,
II
or
III
shortcuts, the
programs are started immediately.
Press the “Power” button to power on the device. The Vasindux Logo will
appear briefly on the display. Once
IF CH BR
is shown on the display, you
may select any of the 3 presets to start the program immediately. Relax
and enjoy your wellness session!
I
(
Energy
),
II
(
Relax
) or
III
(
Sleep
)
°
I - Energy
program gives your mind and body stimulation that
helps to boost your energy and mood.
°
II - Relax
program provides a calming set of earth based
frequencies to relax your mind and nerves while providing cellular
stimulation.
°
III - Sleep
program helps to prepare your mind and body for deep
sleep while gently recharging your cells.
The
Energy
(
I
) and
Relax
(
II
) programs allow you to choose a default
waveform. You may choose either Sine or Square wave. The
Sleep
(
III
)
program is only sine wave. To set the desired waveform in the controller
settings, see the “
Setting Controller Defaults
” section on page 10.
First, plug the AC adapter into your outlet, then plug the AC adapter and the
applicator/s into the back of the controller ensuring they are plugged in the
entire way. Once powered on, the controller will automatically detect if there
are one or two applicators connected and display them with a 1 and/or 2 in the
bottom left and right corners of the display. The controller will automatically
run one or two attachments using whichever program you select.
During operation, the controller displays the program that you selected and
the time remaining for your session.
Press the OK button during operation to pause the session. To continue the
session, press the OK button once more. You may press the power button at
any time to end the session. You may push and hold the power button to turn
off the controller.
At the end of the session, a brief beep will be emitted (if the sound option is on).
If the controller is not in use for five minutes, it will automatically power off.
Note
:
Do not plug in or unplug an attachment while a program is running.
4
