9.04.2021
Document
https://manuals.vasco-electronics.com/#/us/m3/manual
8/27
The buttons below the screen are used to enter text using the voice recognition function. In order to enter text for translation, press and hold the key or just press it once
and, after hearing a beep, start speaking in a clear, even voice, from a distance of about one foot (30 cm).
When you finish, the translation is done automatically after 0.5 second.
Tap the text to playback.
WARNING:
The quality of voice recognition may worsen in a loud environment.
Tap
to get back to the previous screen.
Tap
to enter the application settings.
History
Tap “History” to enter the settings of the translation history.
Remember - if the option is checked Vasco will remember the history of the translations. By confirming
you will delete the previous history entries.
Share - this option allows you to share selected translations or your entire translation history. To share selected translations to an email address, tap this option,
check the translations you want to share, tap “Share”, enter the email address and tap “Send”. If you want to share the whole history, tap this option, enter the email
address and tap send.
Clear - Tap this option and confirm by tapping
to delete all history entries.
Speech
Tap “Speech” to enter the “Speech” settings.
Automatic - Check this option to turn automatic speech translation on/off.
Rate - Increase/decrease speech rate.
Others
I’m in China - Check this option to use the English speech recognition in China.
Pronunciation
The pronunciation starts automatically. Tap the text on the screen to listen to it again.
Pronunciation may not be available for some languages.