DIGIPASS
®
SECURECLICK WITH THE DIGIPASS
®
BLUETOOTH BRIDGE
• Insert your DIGIPASS
®
Bluetooth Bridge in an available USB port on your computer
• If the DIGIPASS
®
Bluetooth Bridge is blinking yellow, please wait until it starts
blinking blue.
• If you are using your DIGIPASS
®
SecureClick for the first time with this DIGIPASS
®
Bluetooth Bridge, press the DIGIPASS
®
SecureClick button for three seconds, it
successively turns full red and running blue. Your device is in pairing mode. It then
blinks yellow, waiting for the push of the button. When you press the button, the
pairing will be done and the DIGIPASS
®
SecureClick will turn green to indicate the
success of the operation. The DIGIPASS
®
Bluetooth Bridge blinks green during the
pairing operations and then will go back to blinking blue when the pairing is done.
You can now navigate and login to your website protected with FIDO U2F. Simply login to
your website protected with FIDO U2F. Enter your user id and password. Push the button
on your DIGIPASS
®
SecureClick when prompted. And Done! You’re logged in securely.
DIGIPASS
®
SECURECLICK MANUAL
8