Vasco DIGIPASS DP 260, User Manual, Page: 6 / 7

EN DIGIPASS DP 260
Note
•
If the account number does not contain more than 6
digits and no other symbols, the whole account number
should be entered. Press
and hold until the 8-digit
Authentication code will appear on the screen.
•
If the account number contains more than 6 digits, only the
last 6 of them should be entered.
Example, 123456789112233445 should be changed to
233445.
•
digit symbols, only 6 digits should be entered (last 6, if there
are more than 6 digits).
Example, 12A3B4567890C123 should be changed to 890123.
Change of the PIN-code
1. When the device is switched-on and APPLI_ is on the screen,
press and hold as long as _ _ _ _ _ NEW PIN will appear
on the screen.
2. Enter the new PIN-code. After _ _ _ _ _ PIN will appear on
the screen, re-enter the same PIN-code.
_ _ _ _ _ NEW PIN CONF
of the PIN-code.
The device may be switched of by pressing . The device will
switch of automatically if no actions will be taken during 25-30
Provide safety of your DIGIPASS device and do not allow
anybody to have access to your PIN-code.
It is forbidden to disassemble DIGIPASS device on physical
In cases of week battery, you will not be able to manage
your account, if no alternative means of authentication
(for instance code card) are at your disposal.
If you have lost your DIGIPASS or it has been stolen, inform
the Bank immediately. In order to receive new DIPIASS
device, you have to visit the Bank or its representative
seconds.