Unlocking e DigiPass
Comments
Display
Action
№
1
LOCK PIN
CodE 1
e device reports that it is blocked. To
unlock PUK1 code is required.
(Respectively for message CodE 2 –
requires a PUK2 code)
Enter
2
LOCK PIN
e device offers you to enter the unlock
code received from the Bank (PUK1 or PUK2).
After you entered the
correct PUK:
3
NEW PIN
e device prompts you to enter the PIN
code created by you.
Enter the PIN code
created by you.
4
XXXXX
PIN CONF
e device prompts you to enter the PIN
code created by you again.
Re-enter the PIN code
created by you.
5
e PIN change was successful.
Remember the new PIN for use later.
If the new PIN twice
entered correctly:
7
NEW PIN CONF
-
-
6
XXXXX
Message FAIL occurs when a re-entered
PIN code does not match your own PIN.
You will be asked to enter the new PIN
code again (see p.4).
Storage and use of device
DigiPass is an electronic device with liquid crystal display. It is not recommended to store DigiPass at
temperatures below -10 °C. It is not allowed to use DigiPass at temperatures below 0 °C.
6
JSC “PNB Banka”
DP270 User’s Guide
Press the button
and holding it press,
the button.
