Vascat MAC-HS 100, Operation And Maintenance Manual

Page: 43 / 64

OPERATION AND MAINTENANCE MANUAL
MAC-HS MOTORS
PAGE: 43
CODE: CTT32 EDITION: 04 RELEASE: SEPTEMBER 2020
Subject to technical changes without prior notice
5.2.1 Connection strips and terminals
The motor has a terminal box with the corresponding electrical connection strip and connection bolts for the current of each
motor.
The following table summarises the different types of terminal boxes, strips and terminals that correspond to the standard
execution of each axle height of the MAC-HS motors.
MOTOR
TERMINAL
STRIP
TIGHTENING
TORQUE
TERMINAL
BOX
MAC-HS 100 M6 4Nm 120x120x45
MAC-HS 132 M8 8Nm 180x180x60
MAC-HS 160 M12 20Nm 300x300x120
MAC-HS 200 M12 bars 40Nm 380x380x210
MAC-HS 225 M12 bars 40Nm 460x460x250
MAC-HS 250 M12 bars 40Nm 460x460x250
Table 24: Standard terminals and boxes on MAC-HS motors
By request, modifications can be made to the values specified in the table.
The motor power connections must be made with a cable section that corresponds to the rated current of the motor and in
accordance with the schematic provided on the interior of the terminal box cover of each motor.
In addition to the main power terminal box, some MAC HS motors also include an additional terminal box for the connection of
sensors. Then specific connection diagram for sensors is located in the interior of this terminal box.