OPERATION AND MAINTENANCE MANUAL
ID MOTORS
PAGE: 12
CODE: CTT52 EDITION: 03 RELEASE: APRIL 2019
Subject to technical changes without prior notice
3.2
Reference standards
The ID motors are designed and manufactured according to the Low Voltage Directive 2006/95/CE and they have been designed
for their use in industrial applications as an incomplete machine or as a machine component as provided for in the 2006/46/CE
Machinery Directive.
The following table summarises the main reference technical standards that have been taken into account for the design of these
motors:
Standard
Description
IEC/EN 60034-1
Dimensioning and behaviour in operation
IEC/EN 60034-2
Method for determining losses
IEC/EN 60034-5
Protection rating
IEC/EN 60034-6
Cooling
IEC/EN 60034-7
Mounting
IEC/EN 60034-8
Marking on terminals and direction of rotation
IEC/EN 60034-9
Noise emissions
IEC/EN 60034-11
Thermal protection
IEC/EN 60034-14
Mechanical vibration levels
IEC/EN 60034-18
Insulation evaluation
IEC/EN 60072-1
Power series and dimensions of rotating electrical machines
Table 2:
Reference standards
In accordance with the current Machinery Directive, the commissioning of these motors is prohibited in the European Union until
conformity of the installation has been confirmed in which the machine is to be installed (see EN 60204-1). If the electrical
machine is to be used outside the European Union, the specific laws of the country in which it is located will apply. Furthermore,
safety standards, local installation and sector-specific standards must be applied.
