Model # XLGTD50-1TC
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg., Inc.
Page 22
Factory # 56-12089
Assembly Instructions
36.
The Sensor/Sound Shelf (N) provides two options: position gaming accessories above TV or
sound bar below TV. Choose the option you prefer, slide SSS Spine (M) onto the XYZ
Mounting Frame (K) properly. Adjust the height of SSS Spine and attach in place. Make
sure the Sensor/Sound Shelf (N) will not hit your TV.
37.
Once the Monitor Brackets (LL/LR) are attached onto the back of television, ask for
assistance to lift the television up to attach the Monitor Brackets onto the XYZ Mounting
Frame (K). Set the hooks on Monitor Brackets over the Mounting Frame then lower them
onto the bars of Mounting Frame. Proceed to center the television.
38.
If you want to adjust the tilt, ask for help from your friends to hold the TV steady before you
start to adjust. Simply turn the both Tilt Adjustment Knobs on Monitor Brackets (LL/LR) with
3/16” Allen Wrench to adjust your TV to provide optimum viewing and minimize glare. When
the TV is in its intended position, tighten both Lock bolts with a long Phillips Screwdriver until they
hit underside of XYZ Mounting Frame (K) to ensure your TV is safe and secure on the wall.
39.
Repeat step 19 to install Sensor/Sound Shelf (N) onto the SSS Spine (M).
40.
Place assembled console under your TV set as shown below. Finally, connect the A/V and
power cables to your TV. You are now ready to enjoy your wall-mounted Flat Panel TV.
