Model # RTG30T1
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 72-14494
Page 10
Assembly Instructions
13. Screw five Glass Raisers (6) all the way into the top holes of Middle Shelf Frame (C) and
both Legs (F & G). Put Suction Cups (1) firmly into top holes of the other four Shelf Frames
as shown in detail #6. Make sure that the Suction Cups go all the way into the pre-drilled
holes to prevent the glass shelf from falling and getting damage.
14. Place the Glass Shelves and Top Glass (J) in place begin with Bottom Glass Shelf (N) as
shown in detail #6. Make sure the glass is properly centered and the black side of glass is
down. Also, be sure to press down evenly and firmly each shelf onto the Suction Cups to
make sure they securely rest onto the Suction Cups.
Note: Make sure that the glass sits correctly. If glass is scratched you can minimize the
damage by using a BLACK marker and filling in scratched area from underneath.
15. Proceed to secure the Top Glass (J) & Second Glass Shelf (K) in place by inserting the
Glass Pins (7) through the pre-drilled hole on glass into top hole of the Upper Spine (H) and
the tab welded on the Second Shelf Frame (B) respectively, as shown in detail #6A.
