Model # RTG44H1
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 72-14494
Page 4
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
2. Locate Spine (E) on a level and protective surface with 3 round holes facing up as shown in
detail #1.
3. Align the pre-drilled holes of 4 Shelf Frames (A, B, C & D) at back rail with the sockets on
the Spine (E) in place. Make sure the flush edges will point up after assemble. Insert and
screw the 1 1/4
” Bolts (3) with Washers (4 & 5) through the pre-drilled holes on back rail.
Tighten the bolts with Allen Wrench provided. See detail #1.
Required hardware in this step
Description:
(3)- 1 1/4” Bolt
(4)- Lock Washer
(5)- Flat Washer
Sketch
Qty.
(8 pcs)
(8 pcs)
(8 pcs)
Tools required: Allen wrench
