Model # BBCXL505GB
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 56-12089
Page 10
Assembly Instructions for Universal Wall Mount
Installing XYZ Mounting Frame onto WOODEN WALL
15. The XYZ Mounting Frame (K)
must be mounted to two Wood Studs at least 12” apart, using
a high quality Stud Finder to locate the two adjacent studs. After you have located the studs,
verify with a nail for added security. See detail #6A.
16. Pre-
drill a 2 1/2" deep hole at the desired height in each stud using a 3/16” drill bit, make
sure that the holes are centered in the studs and level with each other. Use the XYZ
Mounting Frame (K) as a template to mark the corresponding location for the bottom holes
in each stud,
drill holes 2 1/2" deep with the 3/16” drill bit at the marked location.
17. Orient the Mounting Frame with the
“C” plate against the wall, and using four Lag Bolts (10)
with Large Flat Washer (9) through the
slots of “C” Plate on Mounting Frame into the holes
in the wall, secure the mounting frame to the wall as shown in detail #6B.
Required hardware in this step
No.
9
10
Sketch
Description
Large Flat Washer
2 1/2” Lag Bolt
Qty.
4 pcs
4 pcs
Tools required
Stud Finder
, Mallet, Power Drill, 3/16” Drill Bit, Socket Wrench
Adapter with Sock Set, and Level.
Do not over tighten the Lag Bolts. Tighten Lag Bolts only until the Lag
Bolt Washer is pulled firmly against the
“C” Plate of Mounting Frame. If there is a layer of
drywall or other material, this drywall or other material may not exceed 5/8 inch in
thickness. Failure to heed this caution may result property damage and/or personal injury.
