Model # XLGTD52-7K
VAS
®
Page 2
Factory # 33-10944
MANUFACTURER: VAS
®
CATALOG: 3-N-1
TM
Gaming Theater
TM
TV Console (XLGTD52-7K)
DATE OF MANUFACTURE: July 2012
MADE IN CHINA
1. Please read the Assembly Instructions prior to assembling this product.
2. Remove all hardware from box and sort by size.
3. Check to see that all hardware and parts are present BEFORE assembling.
4. Ask a friend to assist you with the assembly of this furniture.
5. To avoid damage, assemble the product on a sturdy, level and protective surface.
6. Please wait until all steps are completed before fully tightening bolts.
7. Make sure all bolts are tightly fastened before the unit is used.
FITS UP TO MOST 60” FLAT PANEL TVs
MAXIMUM LOAD 135 lb. (61.2 kg)
MAXIMUM LOAD 15 lb. (6.8 kg)
MAXIMUM LOAD 50 lb. (22.7 kg)
MAXIMUM LOAD 10 lb. (4.5 kg)
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S
G E N E R A L I N F O R M A T I O N , T I P S a n d T R I C K S
This product is sold with a Tipping Restraint Hardware kit. You must install the Tipping
Restraint Hardware between the wall and the TV stand to prevent any accidents or
damages. When properly installed, this restraint can provide protection against the
unexpected tipping of the unit due to small tremors, bumps or climbing. The restraint is only
a deterrent and is not a substitute for proper adult supervision. Use of tip-over restraints may
only reduce, but not eliminate, the risk of tip-over.
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY
WITH FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE
AND WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT
PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN CENTRE
OF UNIT; CRT TVS, IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS
OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS
COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.
FITS UP TO MOST 60” FLAT PANEL TVs
WITHOUT SWIVELING FLOATER
MAXIMUM LOAD 135 lb. (61.2 kg)
PLACE TV BEHIND STOPPER
