VAS Furniture Mfg. Inc. PRO44-1GB Instruction Booklet Download

Page: 14 / 15

Model # PRO44-1GB

Please call for replacement parts or assistance:

1-866-942-5362

VAS Furniture Mfg. Inc.

Factory No. 56-12089

Page 14

TIPPING RESTRAINT HARDWARE

Note: We have included one Tipping Restraint Hardware bag for this Unit.

When properly installed, this restraint can provide protection against the unexpected tipping
of the Unit due to small tremors, bumps or climbing. We strongly recommend mounting this
hardware to a wall stud and your Unit when installing.

Please carefully read the instructions printed on the white plastic bag.

Note: You must install the Tipping Restraint Hardware with the unit in use to prevent
any accidents or damage to the unit.

Tools Required: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill, and

3/8” Drill Bit.

Your assembly should now be complete.

Thank you for your purchase.

Summary of Contents for PRO44-1GB
















Search results

Summary of Contents for PRO44-1GB

Reviews:

Related manuals for PRO44-1GB

Brands by name

Popular brands

VAS Furniture Mfg. Inc. PRO44-1GB, Instruction Booklet

Search results

Summary of Contents for PRO44-1GB

Reviews:

Related manuals for PRO44-1GB

Brands by name

Popular brands