1.
Loosen the safety screw
[7]
on the tube clamp of the main tube
[4]
. Pull the safety bolt
[12]
out of the square tube
[8]
and crank the square tube all the way down with the
crank
[9]
.
2.
Fix the position of the square tube with the safety screw
[7]
.
3.
Loosen the safety screw
[5]
on the tube clamp of the square tube
[8]
. Pull the safety bolt
[13]
out of the upper extension tube
[6]
and crank the upper extension tube all the way
down with the crank
[9]
.
4.
Fix the position of the extension tube with the safety screw
[5]
.
5.
Remove the spotlights. When dismounting, pay attention to an even weight distribution
to reach a centric load of the stand.
6.
Loosen the safety screw of the mount and detach the crossbar.
7.
Loosen the safety screw
[3]
of the adjustable foot, pull out the corresponding safety bolt
and push the foot completely into the tube. Fix the position with the safety screw
[3]
.
8.
Loosen the safety screw
[1 ]
on the carriage. Pull the safety bolt
[11]
out of the main tube
[4]
and fold up the stand feet
[2]
.
9.
Fix the position with the safety screw
[1]
on the carriage.
10. Pack all parts of the system in their original package, as possible, and store the package
in a dry place protected against moisture.
Dismounting
Operating
18
Wind Up 85 kg TÜV
lighting stand
