Varytec Street Bar IP65 16x3W TW, User Manual

Page: 30 / 52

A built-in automatic show can only be activated when the unit is operating in stand-alone
mode or as master in a master / slave combination. This setting is only relevant if the device is
not controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘PrXX’ . Confirm with [SETUP] . Now you can
select one of the preprogrammed automatic shows. Use [UP] and [DOWN] to select a value
between ‘Pr.01’ and ‘Pr.20’ .
To adjust the speed of the selected automatic show, press [SETUP] repeatedly until the display
shows ‘SP.xx’ . With [UP] and [DOWN] you can now select a value between ‘SP.01’ (slow) and
‘SP.FL’ (fast).
To adjust the strobe frequency, press [SETUP] repeatedly until the display shows ‘FS.xx’ . With
[UP] and [DOWN] you can now select a value between ‘FS.00’ (slow) and ‘FS.FL’ (fast).
To adjust a fade effect, press [SETUP] repeatedly until the display shows ‘Fd.xx’ . With [UP] and
[DOWN] you can now select a value between ‘Fd.00’ (no fading) and ‘Fd.99’ (fast fading).
Wait about 20 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
Operating mode ‘Built-in auto‐
matic show’
Operating
30
Street Bar IP65 16x3W TW
LED bar