Varytec Spot 90, User Manual

Page: 22 / 64

Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to first use.
Inserting the battery into the
remote control
Installation
22
Hero Spot 90 Hero Spot 90 WH
moving head