Varytec LED ROAD PAR 14 x 3W RGB 3in1, User Manual, Page: 4 / 13

4 / 13
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
connections have to be carried out according to the European safety standards.
2. General information
Fixtures: 1 x Led Road PAR
1 x Power cable
1 x DMX cable
1 x User manual
Unpacking:
Thank you for purchasing the LED Par 18x8W RGBW IP65. Every device has been thoroughly tested
and has been transported in perfect operation condition. Carefully check the carton for damage that
may occur during transporting. If the carton appears to be damaged, carefully inspect your fixture for
any damage and be sure all accessories necessary to operate the unit has arrived intact. Carefully
unpack the carton, check the contents to ensure that all parts are present, and have been received in
good condition.
AC Power
The fixture has an auto-switching power supply that can accommodate a wide range of input voltages.
The only thing necessary to do before powering on the unit is to make sure the line voltage you are
applying is within the range of accepted voltages. This fixture will accommodate between 100V and
240V AC 50-60Hz. All fixtures must be powered directly to a switches circuit and cannot be run with a
rheostat (variable resistor or dimmer circuit, even if the rheostat or dimmer channel is used solely for
0% to 100% switch).