Varytec LED PAD 147, User Manual

Page: 4 / 8

4 / 8
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.
2. Technical Data
Power supply 100 - 240V 50/60Hz
Power consumption 15W
Current 0.1A
Sound to Light Via built in mic
DMX512 connection 3 Pin XLR
Weight 2,1 Kg
Measurements 273 x 265 x 79mm
Maximum ambient temperature -20° - +40°C
Maximum housing temperature +20° - +60°C
Fuse F1A, 250V
Channel 6
Number of LEDs 147 x 10mm LEDs (51R, 48G, 48B)
Beam angle 25°
3. Operation
3.1. DMX Control
To set up your desired DMX address, you have to set up the dipswitch on the backside as follows:
- Set the dip 10 to OFF
- With all the other dipswitches 1 to 9 you can set up the DMX address regarding the binary
system. In this system each dip has a value, which you have to add to get the dmx address.
Dip 1 2 3 4 5 6 7 8 9
Wert 1 2 4 8 16 32 64 128 256
If you want to set the address 10 then you have to setthe dips 4 and 2 to ON, because theire
values are 2 and 8 and 2+8=10.
Remember that the item needs 6 channels.
So if you want to set the first item to address 1, the second item has to be minimum address 7,
because 1+6=7.