7
Addr:
You can set the DMX start-address here.
Auto:
You can select the automatic programs here.
Chnd:
You can select the DMX mode for using the device.
(For using the DMX mode connect the DMXin of the
Gigabar IV
with the DMXout of a DMX-controller by a
DMX-cable. If you want to control several devices
connect the DMXin of each device with the DMXout of
each previous device in the signal chain.)
Colo:
Here you can select/adjust a color (for standalone
mode
: Col1…Col9 are predefined colors. Using
AtF
,
you can mix a color on your own.)
Soun:
Select the desired sound mode here.
SLav:
Adjust here, whether the device works as master or
slave. (Connect the devices as mentioned in Chnd.
The first device of the daisy chain has to be the
master, the following devices work as slaves.)
VER:
This menu item shows the actual firmware version.
Summary of Contents for LED Giga Bar 4
Page 1: ...LED Giga Bar 4 User Manual...
