Varytec LED Derby ST, User Manual

Page: 33 / 52

When the display shows the desired value, press [ENTER] to confirm the selection and then
[MENU] to return to the parent menu.
Press [MENU] . Use [UP] or [DOWN] to select the menu item ‘SLA’ . Press [ENTER] . The display
shows ‘SLAv’ .
Confirm with [ENTER] . The slave device now exactly follows the specifications of the master
device. Then press [MENU] to return to the higher-level menu.
Press [MENU] . Use [UP] or [DOWN] to select the menu item ‘SYS’ . Press [ENTER] . Use [UP] or
[DOWN] to select one of the following menu items and then press [ENTER] :
n ‘LEDS’ : Choose between ‘On’ and ‘Off’ to turn all LEDs on or off
n
‘vers’ : The display shows the current software version used by the device.
n
‘test’ : A test program is started.
n
‘rESt’ : All device settings are reset.
n
Operating mode ‘Slave’
System menu
Operating
LED Derby ST
33
LED effect