7.2 Main menu
Press
[ENTER]
to activate the main menu.
Use
[UP]
and
[DOWN]
to change the respectively indicated value. When the display shows the
desired value press
[ENTER]
.
To exit the menu item without making changes, press
[MENU]
.
If you don't press any button for about 30 seconds the display turns off. Then press
[MENU]
,
[ENTER]
,
[UP]
or
[DOWN]
briefly to turn it on again.
All previous settings are retained even when you switch the device off and disconnect it from
the mains.
Use the
‘DMX Address’
menu to set the DMX address.
Press
[ENTER]
to activate the main menu and use
[UP]
or
[DOWN]
until the display shows
‘DMX
Address’
. Confirm the selection with
[ENTER]
and use
[UP]
or
[DOWN]
to select a value between
1 and 512 to set the desired DMX address.
When the display shows the desired value confirm the setting with
[ENTER]
. To exit the menu
item without making changes, press
[MENU]
.
Make sure that this number matches the configuration of your DMX controller.
DMX address
Operating
40
Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1
moving head
