Varytec Hero Spot 230, User Manual

Page: 20 / 40

In the ‘Running Mode’ menu, you can make manual settings for the device parame‐
ters.
1.
Press [SET] to activate the main menu.
2.
Use [UP] or [DOWN] until the display shows ‘Running Mode’ and confirm with
[SET] .
3.
Use [UP] or [DOWN] to select the menu item ‘Manual Control’ and confirm with
[SET] .
4.
Use [UP] or [DOWN] to select the desired parameter and confirm with [SET] .
The following sub menus are available:
Menu level 3 Menu level 4/5 Description
‘Pan’ ‘0’ … ‘540’ Setting the angle of rotation
‘Tilt’ ‘0’ … ‘260’ Setting the angle of inclination
‘Pan/Tilt Speed’ ‘0’ … ‘255’ Setting the speed of pan and tilt,
increasing speed
‘Dimmer’ ‘0’ … ‘255’ Setting the dimmer intensity
‘Strobe’ ‘0’ … ‘30’ Setting the frequency of the strobo‐
scope, increasing speed
‘Color’ Colour setting Setting one of the seven colours of
the colour wheel or white (value
ranges such as 18-channel DMX
mode, see
Ä
Chapter 7.9 ‘Functions in
18-channel DMX mode’ on page 28 )
‘color flow
forward’
‘0’ … ‘255’
Speed for colour change clockwise,
increasing speed
‘color flow
backward’
‘0’ … ‘255’
Speed for colour change counter‐
clockwise, increasing speed
‘Fixed Gobo’ Static Gobo
wheel
Setting one of the seven static Gobos
‘gobo flow
forward’
‘0’ … ‘255’
Speed for gobo pass clockwise,
increasing speed
‘gobo flow
backward’
‘0’ … ‘255’
Speed for gobo pass counterclock‐
wise, increasing speed
‘Rotatable Gobo’ Rotatable gobo
wheel
Setting one of the seven rotatable
gobos
‘gobo flow
forward’
‘0’ … ‘255’
Speed for gobo pass clockwise,
increasing speed
Manual operating on the unit
Operating
20
Hero Spot 230
moving head