Varytec Giga Bar Pix 8 UV, User Manual

Page: 34 / 52

The dimmer can only be activated when the unit is operating in stand alone mode or as master
in a master / slave combination. This setting is only relevant if the device is not controlled via
DMX.
Press
[MODE] repeatedly until the display shows ‘DIMR’ . This activates the dimmer.
To adjust the brightness, press [SETUP] repeatedly until the display shows ‘Uxxx’ . With [UP] and
[DOWN] you can now select a value between ‘U000’ (dark) and ‘U255’ (bright).
Now you can set the flash rate of the dimmer. Press [SETUP] repeatedly until the display shows
‘FSxx’ . With [UP] and [DOWN] you can now select a value between ‘SPFS00’ (slow) and ‘FS99’
(fast).
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
Dimmer
Operating
34
Giga Bar Pix 8 UV
LED bar