10 / 17
3.3.1. Changing the lamp
Important! If you change the lamp it is not allowed to touch the lamp with bare fingers. The body fat
layer remains in the lamp and could damaged it or brand.
1. Interrupt the current supply. Wait at least
20min before you open the device, so that the
old lamp can cool down.
2. Use a cross-tip screwdriver to open the cover
3. Loose the Lamp wires:
4. Loose the screws of the metal pieces:
5. Loose the screws of the lamp holders next to
the lamp and remove it:
6. Install the new lamp in reverse
Summary of Contents for Beam R2
Page 1: ...Manual Beam R2 ...
