Varytec BAT.PAR 8 RGBW, User Manual

Page: 37 / 72

To return to the next higher menu level without changes, press [MENU] .
Use ‘Address’ to select the start address channel for the DMX address.
1.
Press [MENU] and use [UP] or [DOWN] to select the submenu ‘Address’ .
2.
Confirm the selection with [ENTER] .
3.
Use [UP] or [DOWN] to select the desired start address from 1 to 512.
4.
Confirm the selection with [ENTER] .
ð
The selected start address is accepted. When a DMX signal is present, ‘*’ appears
behind the DMX address.
Make sure that this number matches the configuration of your DMX controller.
Use ‘AUTO’ to select six automatic programmes and set a running speed.
1.
Press [MENU] and use [UP] or [DOWN] to select the submenu ‘AUTO’ .
2.
Confirm the selection with [ENTER] .
DMX address
Operating mode Auto
Operating
BAT.PAR 8 RGBW
37
LED bar