Varytec BAT.PAR 6 RGBUV, User Manual

Page: 33 / 60

Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Auto’ . Confirm with [ENTER] .
Use [UP] and [DOWN] to select the desired mode ‘Aut1’ , ‘Aut2’ or ‘Aut3’ . Confirm with [ENTER] .
You can now set the program's speed between ‘SP 1’ and ‘SP 9’ .
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Info’ . Confirm with [ENTER] .
The display shows the current software version.
Use
[UP] and [DOWN] to select the option ‘tenP’ . Confirm with [ENTER] . The display shows the
current temperature of the device.
or
Use
[UP] and [DOWN] to select the option ‘uer’ . Confirm with [ENTER] . The display shows the
current software version.
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘SLav’ . Confirm with [ENTER] .
The display shows ‘Sla’ , the unit is now in Slave mode.
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Chnd’ . Confirm with [ENTER] .
Now use [UP] or [DOWN] to select one of the following DMX operating modes:
Operating mode Auto
Device info
Operating mode Slave
DMX mode, BAT.PAR 6 RGBWA
(item no. 385435)
Operating
BAT.PAR 6 RGBWA BAT.PAR 6 RGBUV
33
LED spotlight