Varytec BAT.PAR 3 RGBW, User Manual, Page: 34 / 56

Use [UP] and [DOWN] to select the desired mode ‘Aut1’ , ‘Aut2’ or ‘Aut3’ . Confirm with [ENTER] .
Now you can adjust the progress speed of the programme between ‘SP 1’ and ‘SP 9’ .
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Info’ . Confirm with [ENTER] .
The display shows the version number of the currently installed software.
Use
[UP] and [DOWN] to select the option ‘tenP’ . Confirm with [ENTER] . The display shows the
current device temperature.
or
Use
[UP] and [DOWN] to select the option ‘uer’ . Confirm with [ENTER] . The display shows the
version number of the currently installed software.
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘SLav’ . Confirm with [ENTER] .
The display shows ‘Sla’ , the unit is now in Slave mode.
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Chnd’ . Confirm with [ENTER] .
Now use [UP] or [DOWN] to select one of the following DMX operating modes:
Device info
Operating mode Slave
DMX mode
Operating
34
BAT.PAR 3 RGBW
LED spotlight