manualshive.com logo in svg

Varytec BAT.PAR 144 RGBW, User Manual

Share
Download
Varytec BAT.PAR 144 RGBW User Manual Download Page 23

Store lithium batteries in a cool, dry place, ideally in the original packaging.
Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium batteries are

hermetically sealed. Never attempt to open a lithium battery.
If the battery housing is damaged small amounts of the electrolyte may leak out. If this should

happen, seal the lithium battery in airtight packaging and wipe up the traces of electrolyte

using absorbent paper towels. You must wear protective rubber gloves when doing so. Clean

your hands and the affected surface thoroughly with cold water.
Never attempt to recharge non-rechargeable lithium batteries. When charging lithium bat-

teries you must use a suitable charging device intended for the purpose.
Before disposing of the device remove the lithium batteries. Protect used lithium batteries

against potential short circuits, e.g. by covering the poles with adhesive tape.
Only use powder extinguishers or other suitable extinguishing agents to extinguish a burning

lithium battery.

Installation

 

BAT.PAR 144 RGBW

23

LED spotlight

Summary of Contents for BAT.PAR 144 RGBW





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands