Varytec 390731, User Manual, Page: 35 / 52

Press [MENU] . Press or repeatedly until the display shows ‘rSet’ . Press [ENTER] to reset the
device to its factory default settings. This will erase all user settings. To return to the parent
menu, press [MENU] .
Press [MENU] . Press or repeatedly until the display shows ‘CoLo’ . Press [ENTER] . Now use
or to select one of the preset colours ‘CoL1’ or ‘CoL70’ . When the display shows the desired
value press [ENTER] to confirm the selection and then [MENU] to return to the parent menu. To
return to the parent menu without making changes, press [MENU] .
Press [MENU] . Press or repeatedly until the display shows ‘rELE’ . Press [ENTER] . To discon‐
nect a current connection, keep or pressed until the display reaches ‘200’ and changes to
‘YES’ . This interrupts the existing wireless connection.
If you do not keep or pressed but press instead [ENTER] again, the display shows ‘UIFI’ .
Press again [ENTER] to then use or to let the display show ‘on’ or ‘oFF’ . Press [ENTER] while
the display shows ‘on’ , to enable the wireless module. Press [ENTER] while the display shows
‘oFF’ , to disable the wireless module.
When using the wireless DMX function, unfold the antenna for wireless DMX control from the
bracket and determine a proper alignment for transmission.
Reset to factory defaults
Colour selection
Enabling wireless DMX
Operating
LED Accu Pad 7 7x10W RGBAWUV
35