manualshive.com logo in svg

VarTech Systems VTPC500PSS, User Manual, Page: 6 / 12

Share
Download
VarTech Systems VTPC500PSS User Manual Download Page 6

19.0” C1-D2 Compliant Panel Mount PC 

 

 486-0032-0-00 

6

Cleaning the LCD/LED monitor 

 

To clean the LCD/LED panel: 

  Wipe the screen gently with a clean lens brush made of camel hair, or a soft, clean, lint free 

cloth. This is to remove dust and other particles without scratching the LCD/LED panel. 

  If it is still not clean, then wipe with a damp lint free cloth and blow on it to dry. 

 
Do not clean the panel with a keton-type material (e.g. acetone), or ethyl toluene, ethyl acid, methyl 
or chloride. These may damage the LCD/LED panel. 
 
Do not apply pressure to the LCD/LED panel. 

 
 

Standard Technical Specifications: 
 
Standard Monitor: 
 

Size / Type

 

19.0” SXGA TFT LCD

 

Native Resolution

 

1280 x 1024

 

Contrast Ratio

 

800:1

 

Viewing Angles

 

Horizontal: 178° 

 

    Vertical: 178°

 

Pixel Pitch

 

0.294mm

 

Brightness

 (typical)

 

250 cd/m²

 

Response Time

 (typical)

 

7ms

 

Colors Supported

 

16.7 million

 

 

Summary of Contents for VTPC500PSS













Reviews:

No comments