VarTech Systems VT121 DiamondVue Series, User Manual

Page: 11 / 22

11
Exit Exit the OSD menu and save the settings
Position#
Autosetup Auto adjust the positions, phase, frequency Yes No
Frequency Adjust the image horizontal size
Phase Image Horizontal
Position Image Vertical
Position Fine tune the data sampling position (adjust image quality) Use +/- to move the image
horizontally Press
–
or + (-+ ) Use +/- to move the image vertically Press
–
or + (-+ )
Exit Exit the OSD menu
Utilities
OSD setting 4
OSD Timeout : 0 / 10 / 20 / 30 / 40 / 50 / 60 seconds (Always on when set to 0) Press
–
or
+ (-+ ) OSD menu horizontal position Press
–
or + (-+ ) OSD menu vertical position Press
–
or + (-+ )
Load Factory Default
Sharpness Initialize the setting stored in non-volatile memory Adjust sharpness level Press
–
or + (-+ )
Total : 49 steps
Exit Exit the OSD menu
Exit the OSD menu