background image

 

VT150 DiamondVue Series User Guide                                                                                                                                         150-005 

         Section 

  2 

                    

DISPLAY SETUP

DISPLAY SETUP

 

 

VT150 Series Display Features 

⇒ 

Capable of displaying unlimited colors in a continuous spectrum. The high contrast LCD           
enhances the image with no geometric distortion. 

⇒ 

The VT150 DiamondVue Series directly accepts an analog 5 wire RGB with separate H/V sync 
or 4 wire RGB with separate combined sync or 3 wire SOG. 

⇒ 

The VT150 DiamondVue Series is auto synchronous adjusting the display to the appropriate  
input between VGA, SVGA,XGA, and SXGA. 

⇒ 

The VT150 DiamondVue Series is available in Panel Mount, Rack Mount, or Wall Mount         
industrial packages. 

⇒ 

The VT150 DiamondVue Series is supplied with a Anti-Reflective Screen unless equipped with 
an optional Touch System. 

⇒ 

The VT150 DiamondVue Series has an integrated  115/220VAC supply as standard on all    
models.  Optional DC voltage available. 

2.1 

Summary of Contents for DiamondVue VT150M



















Reviews: