manualshive.com logo in svg

VarTech Systems ColorVue VT190PC, User Manual

Share
Download
VarTech Systems ColorVue VT190PC User Manual Download Page 19

 

VT190 ColorVue User Guide                                                                                                                                     150-077 

17 

Mechanical Drawings

 

8 

Section 

Mechanical Drawings 

Model 

Description 

Page(s) 

VT190PC

 

19.0” ColorVue Panel Mount Mechanical Drawing 

18-19 

VT190RC

 

19.0” ColorVue Rack Mount Mechanical Drawing 

20 

Panel Mounting Procedure  

1. Cut and drill the panel (refer to panel mount drawing). Measurements are in inches. 

 
Panel Mounting Cutout 

2. If access to the side of the monitor is not available following installation, attach the power and 

video cables to the side of the monitor at this time.  

3. Install the monitor in the prepared cutout. 
4. Install the lock nuts and washers, supplied with the monitor, behind the holes running along 

the sides and top/bottom of the cutout in the panel. Extra lock nuts and washers are provided. 

7.1 

Panel Mount Procedure 

 

Note:  

Use #10-32 nuts for mounting.

 

5. Tighten all mounting nuts evenly to a torque of 24 inch-pounds. 

ATTENTION: 

Mounting nuts must be tightened to a torque of 24 inch-pounds to provide panel 

seal and avoid potential damage. Vartech Systems  assumes no responsibility for water or 
chemical damage to the monitor or other equipment within the enclosure due to improper   
installation. 

6. Attach the power and video cables to the side of the monitor if  you have not already done so.  

 

Summary of Contents for ColorVue VT190PC






















Reviews:

No comments

Brands by name

Popular brands

Load more brands