Varta V-AVM711D, Instruction Manual

Page: 41 / 120

V-AVM711D
41
will shut down its bluetooth power after disconnecting and the built-in bluetooth cannot connect with them under
this condition.
•
Disconnect
You can break the connection between the built-in bluetooth and your mobile phone by operating your phone or
pressing the disconnection button. After disconnecting, “Disconnected” will be displayed on the screen and signal
intensity and battery status are empty.
2. Stereo connection
There are three connection modes.
•
Connection request from the built-in bluetooth
Changing the work mode of the built-in bluetooth to stereo mode, pressing the connection button on the screen, the
built-in bluetooth will connect with your mobile phone and your mobile phone will open audio playback software.
•
Connection request from your mobile phone
Opening audio playback software of your mobile phone, playing one audio file, setting playback mode to
bluetooth, selecting the built-in bluetooth from the bluetooth device list, the built-in bluetooth will change the work
mode to stereo mode automatically. If the built-in bluetooth cannot be found in the device list of your mobile
phone, you should pair and connect your mobile phone with the built-in bluetooth first.
•
Disconnect
You can break the connection between the built-in bluetooth and your mobile phone by operating your phone or
pressing the disconnection button.
Answer one call
The built-in bluetooth changes the work mode to phone mode automatically and displays the calling number when
one call is coming in. The built-in bluetooth will put through the call automatically if you have set the “Auto
Answer” option of “Bluetooth” of “Setup” to “On”, whereas you should put through the call manually.