![background image](http://html1.mh-extra.com/html/varta/element-series/element-series_instruction-manual_3590149141.webp)
Subject to modification!
Updated 10/2017
141
G
ener
al
O
p
er
atio
n
Inst
all
atio
n
O
p
er
atio
n
(
S
e
rvi
ce
)
Ma
int
enan
c
e
Setting the terminal resistor at the right battery charger
Figure 33: Setting the terminal resistor
Note:
Setting the terminal resistor,
only at expansion stage element 9/12.
Applies only to battery chargers having cables plugged into
both connections (see Fig. 32) at the rear. The terminal
resistor of the other battery charger must be set to
120 ohms.
If there is only one battery charger, the terminal resistor
must always be set to 120 ohms.